Chiama la nostra sede centrale
+49 5751 4003-0
conFORM
The EMC standard enclosure
Certificazione opzionale disponibile:
IP 66, Optional: IP 67
The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7032
• High inner collar
• Tooth system in the bottom section for continuous contact
• Sizes compatible with standard enclosures available on the market, therefore easy to exchange
• Lid screws in stainless steel 1.4567
• Enclosure seal: TPE moulded gasket
Richiedi offerta
Scheda tecnica PDF
Di più
conFORM is a highly versatile and economic range of EMC shielded aluminium enclosures with in-built shielding. The design does not require expensive and delicate conductive gaskets – continuous contact is created by means of a patented tooth system which is pre-cast into the lid and base.
The conFORM range is ideal for industrial electronics and controls that require special levels of shielding. The enclosures are water-tight and weather resistant to IP 66. Threaded screw bosses are provided inside for fitting circuit boards, mounting plates, terminal rails etc. Accessories such as mounting plates and cable glands are also available.
We can supply conFORM enclosures fully customised to your requirements.
Panoramica dei prodotti
Dimensioni esterne
Schede tecniche
Dati
- conFORM
- EK 081
- N. pezzo
- 110.081.000
- Dimensioni esterne
- 84x79x67 Ricorda
- conFORM
- EK 082
- N. pezzo
- 110.082.000
- Dimensioni esterne
- 85x130x67 Ricorda
- conFORM
- EK 083
- N. pezzo
- 110.083.000
- Dimensioni esterne
- 85x180x67 Ricorda
- conFORM
- EK 121
- N. pezzo
- 110.121.000
- Dimensioni esterne
- 125x127x90 Ricorda
- conFORM
- EK 123
- N. pezzo
- 110.123.000
- Dimensioni esterne
- 126x226x90 Ricorda
- conFORM
- EK 161
- N. pezzo
- 110.161.000
- Dimensioni esterne
- 166x166x100 Ricorda
- conFORM
- EK 162
- N. pezzo
- 110.162.000
- Dimensioni esterne
- 168x268x100 Ricorda
- conFORM
- EKF 081
- N. pezzo
- 111.081.000
- Dimensioni esterne
- 84x79x44 Ricorda
- conFORM
- EKF 082
- N. pezzo
- 111.082.000
- Dimensioni esterne
- 85x130x44 Ricorda
- conFORM
- EKF 083
- N. pezzo
- 111.083.000
- Dimensioni esterne
- 85x180x44 Ricorda
- conFORM
- EKF 121
- N. pezzo
- 111.121.000
- Dimensioni esterne
- 125x127x60 Ricorda
- conFORM
- EKF 123
- N. pezzo
- 111.123.000
- Dimensioni esterne
- 126x226x60 Ricorda
- conFORM
- EKF 161
- N. pezzo
- 111.161.000
- Dimensioni esterne
- 166x166x60 Ricorda
- conFORM
- EKF 162
- N. pezzo
- 111.162.000
- Dimensioni esterne
- 168x268x60 Ricorda
79x84x67
130x85x67
180x85x67
127x125x90
226x126x90
166x166x100
268x168x100
79x84x44
130x85x44
180x85x44
127x125x60
226x126x60
166x166x60
268x168x60
| Enclosure sizes | 14 |
| Additional info | High shielding from radiation interference (EMC tested by the University of Hanover) |
| Inexpensive, as there is no need for expensive conductive gaskets | |
| Large range of accessories | |
| Enclosure | Diecast aluminium alloy: |
| EN AN-44300 DIN EN 1706 | |
| (GD Al Si 12/DIN 1725) | |
| 1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom. | |
| Fastening | Separate screw channels outside of the enclosure interior |
| Console panel integration with installation kit | |
| Internal mounting | M4/M6 fastening thread on the enclosure base and attachment options in the lid |
| Ingress protection | IP 66 / EN 60529 |
| Optional: IP 67 / EN 60529 | |
| Gasket | TPE moulded gasket, silicone-free |
| Optional: Silicone gasket | |
| Lid screws | Stainless steel 1.4567, captive |
| Surface | Powder coating RAL 7032, pebble grey |
| Optional: Special colours | |
| Optional: Corrosion protection | |
| Customising | Learn more about our full customising service for installation-ready enclosures |