Chiama la nostra sede centrale
+49 5751 4003-0
QUADRO-50
The stable support arm system
The most important product features:
• Profile cross-sections: Square 50 mm
• System parts material: diecast aluminium/spheroidal graphite iron, powder coating, RAL 7040
• Suspension profile material: drawn steel, powder coating, RAL 7035
• Various connections available
• Adaptation from square tube to round tube Ø48 possible
• Can be used with all ROLEC command enclosures
• Possible to route connectors such as HDMI, DVI, network adapters, etc.
• Gasket: chloroprene (CR)
Richiedi offerta
Scheda tecnica PDF
Di più
QUADRO 50 gets its name from the 50 mm square steel profiles which form the basis of the system. Connection joints and couplings are made of high load spheroidal graphite which provides a higher than average bearing strength. The overall static equilibrium of the system is extremely high due to its use of steel profiles.
QUADRO can be assembled quickly and easily at the point of use, thanks to its sophisticated technology. The articulated parts are equipped with a swivel limiter. A control lamp adapter and a QUADRO 50/taraPLUS elbow for connection to the taraPLUS system complete the range. Compatible command enclosures include commandCASE aluFACE and profiPANEL.
Elementi del sistema
Choose the right “starting component” for your suspension arm here.
Supporto
Support profiles are available in four standard lengths from stock, or precisely to the millimetre in accordance with your requirements.
Adattatores
Using the correct adaptors, you can connect every conceivable panel to the QUADRO system.
Giuntos
Complement your system with suitable elbows and couplings.
A = Adjustable
A = Adjustable
Panoramica dei prodotti
Dimensioni esterne
Schede tecniche
Dati
| Capacità portante |  |
| Principle | Closed system with easy access to system parts for medium and heavy loads |
| Additional info | Simple alignment of the system |
| Heavy-duty system parts made from spheroidal graphite | |
| Signal light adapter available for the elbow | |
| Transition from QUADRO 50 to taraPLUS around 48mm possible with special elbow | |
| Compatible ROLEC control enclosures: commandCASE, aluFACE, profiPANEL | |
| Material/coating | System elements: Aluminium and high-tensile spheroidal graphite |
| Powder coating RAL 7040, window grey | |
| Optional: Special colours | |
| Supportprofile: Steel, drawn | |
| Powder coating RAL 7035, light grey | |
| Optional: Special colours | |
| Bellows: PVC, RAL 7035, light grey | |
| Cable routing | Suitable for HDMI, patch cables, USB etc., not suitable for DVI plugs |
| Ingress protection | IP 54 / EN 60529 |
| Torque for cutting ring screws | 30 Nm = 3 kg/m |