commandCASE enclosures application
commandCASE - modern diecast controller enclosures with ergonomic and elegant design handles
Version CC with hinged lid and 1 quick-acting snap closure
Version CC 300 with hinged lid and 2 quick-acting snap closures
Version CCS with hinged lid. Lid screw fixed on other side (from the rear)
Version CCV with screw fixed lid (from the rear)
On versions CCS and CCV the lid is fixed by screws from the rear side
Push-in covers hide the rear screw holes and protect the edges
Convenient quick-acting snap closure (on version CC)
Lockable quick-acting snap closure also available


The modern operating and control enclosure


IP 66

The key product features:
• Enclosure material: diecast aluminium
• Enclosure surface: powder coating, RAL 7035
• Ergonomically shaped design handle bars
• Practical quick-acting closure
• Version CC: hinged lid with quick-action closure
• Version CCS: hinged lid, screw-fixed from the rear section
• Version CCV: fixed lid, screw-fixed from the rear section
• Connection to the suspension systems profiPLUS or tarSMART
• Integrated recess in cover for membrane keypad or front plate
• Enclosure seal: PUR


commandCASE is an elegant and economic range of diecast command and control enclosures. The highly attractive design perfectly matches our profiPLUS suspension arm system, or other modern arms systems. All models feature ergonomic handles on the front for easy positioning when suspended.  

The range is available in three versions: with hinges and quick-action closure (also lockable), with hinges and screw fixing or as a fully screw fixed version. Lid supports provide strain-relief. The front is recessed to accommodate a membrane keypad, front plate or display panel. At the rear the screw channels are fitted with cover caps which also serve as edge protection. Threaded screw bosses are provided inside for mounting assemblies and components. Mounting plates, matching cable glands and other accessories are also available.

We can supply commandCASE enclosures fully customised to your requirements.

Request offer PDF datasheet
Product overview Dimensions Data Sheets Data
Enclosure sizes6 sizes in 3 variants
Additional infoDesigner handles
Integrated recess in the lid for membrane keypad or front plates
End caps made from polyoxymethylene (POM), RAL 7016 anthracite grey
Integrated lid support, PP (polypropylene), RAL 7040 window grey
Optional: Quick-acting closure and hinge, narrow side (side W)
EnclosureDie-cast aluminium alloy
EN AN-44300 DIN EN 1706
(GD Al Si 12/DIN 1725)
1° mould slope for casting ejection > internal circumference dimensions decrease by 1° towards enclosure bottom.
FasteningOn a ROLEC suspension arm system or directly attached to the wall in the version with lock and hinge - with or without designer handles
Internal mountingM5 fastening thread on the enclosure base and in the lid
Ingress protectionIP 66 / EN 60529
SurfacePowder coating RAL 7035, light grey
Optional: Special colours
Optional: Corrosion protection
CustomisingLearn more about our full customising service for installation-ready enclosures

Give us a call

+49 5751 4003-0


Write us

or use our
contact form